Governance – Compliance

All 2TEC2 raw materials have been registered, evaluated and authorised according to the REACH directive, meaning 2TEC2 floor covering is REACH-compliant.

REACH aims to improve the protection of human health and the environment through the better and earlier identification of chemical substances that are produced or imported in the European Union. This is done by the four processes of REACH: Registration, Evaluation, Authorization and restriction of CHemicals.

An OK Biobased certificate, awarded by TÜV Austria, indicates that a product contains renewable raw materials, such as starch or cellulose.

With almost 40% biobased content in the woven top layer, 2TEC2 is one of the first floor coverings that achieved this certification.

We are happy to announce that 2TEC2 flooring materials have been added to SundaHus’ database. This database consists of substances, materials and products that are being used in construction and buildings. It is a system used for conscious material choices in order to ensure a non-toxic and long term valuable building.

Products are assessed and awarded one of the letters A, B, C or D where A is the best. 2TEC2 has been given a B-score, which is the highest score possible for vinyl containing products.

In Europe, all textile floor coverings must have a CE label, without the mark, products cannot be sold within the EU. This CE label must be visible on both the packaging and the technical data sheet.

The CE label defines the level to which a product meets standards on health, safety and energy.

The UKCA marking is the product marking used for products placed on the market in Great Britain (England, Scotland and Wales).

The UKCA marking applies to most products previously subject to the CE marking. The technical requirements (sometimes referred to as ‘essential requirements’) you must meet for the UKCA marking will depend on the product specific legislation for your product.

2TEC2 floor covering is free from Formaldehyde. Formaldehyde can cause irritation to the eyes, nose and throat.

This standard determinates the formaldehyde emissions of the building product by using a chamber method: a climate chamber under defined conditions, which relate to typical conditions in real-life.

2TEC2 floors are FloorScore certified. By carrying this label, 2TEC2 contributes to a safer, healthier environment for the end user at home or at work. FloorScore is one of the most recognized certifications in the USA. It makes very high demands on low VOC’s to ensure the quality of indoor air.

The GUT label is recognised as a guarantee for environmental and consumer protection. All products under the GUT label are stringently tested for harmful substances, VOC emissions and odour.

2TEC2 is conform with the M1 Emission Classification of Building Materials standard. The aim of the classification is to enhance the development and the use of low-emitting building materials to create a healthy indoor environment. M1 stands for low emissions. M1 also includes odour testing, defining the acceptability of the odour associated with the material.

Full details, declaration, and testing report are available on request.

All 2TEC2 products score A+. The “Emissions dans l'air intérieur” label is a mandatory label for building materials that are being sold in France. The label provides buyers and users with information on emissions of Volatile Organic Compounds from the building materials. The label divides products into the 4 classes: A+ (very low emissions), A, B, and C (very high emissions).

2TEC2 floor covering is free of any of the chemical components mentioned on the CMR components list. This list contains an overview of products that can cause Carcinogenic, Mutagenic or Reprotoxic damage.

CDPH Standard Method stands for California Department of Public Health Standard Method. 

2TEC2 flooring products have been tested by a certified lab by CDPH regulations. Based on the results, it has been concluded that 2TEC2 has passed these tests and contributes to a safe indoor environment. CDPH covers a standard method for the testing and evaluation of VOC’s from indoor sources.

The testing report and full details are available on request.

BREEAM v6 is a leading environmental assessment system for masterplanning projects and buildings.

Buildings are registered to work to achieve ESG, health and net zero goals.

LEED v4.1 stands for Leadership in Energy and Environmental Design and is a green building certification program with a rating system that addresses environmental performance of buildings on issues such as equity, health, ecosystems, and resilience.

WELL is an evidence-based roadmap for applying the WELL Building Standard to support the health and well-being of your people and your organisation.